Make Inbound Calls - ATCOM APBX IP2G4A User Manual

APBX IP2G4A User Manual
Authentication for Selected Extensions before dialing out.
Outbound Extension Selection
Select extensions which can dial out with this outbound route. In my case, only 6000 can prefix 9 to dial out.
Outbound Trunk Selection
Select trunks which calls are forwarded out through. In my case, the call will be forwarded out via analog trunk FXO3
first, if failed, will try FXO4.

5.3 Make inbound calls

Go to PBX Settings -> Inbound Routes, click to add an inbound route. Just setting Selected Trunks and
Path is OK.
Caller ID
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 5.2 can be used here as same.
DID number
Just leave it blank.
Extension
29 ATCOM TECHNOLOGY CO., LIMITED