Lan Settings - ATCOM APBX IP2G4A User Manual

APBX IP2G4A User Manual
APBX will obtain an IP address automatically from DHCP server when rebooting. It's not recommended to choose
this option unless there is a reserved IP for APBX in DHCP server so that APBX can keep the same IP all the time.
Static IP
Set an IP address manually according to the real network environment. If APBX is behind a router, the gateway is
usually set to the IP of the router.
PPPoE
APBX will obtain an IP address automatically after establishing a connection to PPPoE server with username and
password.

2.3 LAN Settings

DHCP
Yes: APBX will get an IP address from DHCP server, Not recommended.
No: Configure IP address manually for LAN. Default is NO.
NAT
Yes: APBX will act as a router, all the devices connected to LAN can access the network connected to WAN. Default
is Yes.
No: Networks connected to LAN and WAN are independent.
NOTE: IP addresses of LAN and WAN can't be in the same network.
For example: IP of WAN is 192.168.1.100/255.255.255.0, IP of LAN can't be 192.168.1.xx/255.255.255.0
6 ATCOM TECHNOLOGY CO., LIMITED