Wan Settings; System Status - ATCOM APBX IP01 User Manual

APBX IP01 User Manual

2.2 WAN Settings

There are two ways to set an IP address to WAN port: DHCP, Static IP.
DHCP
APBX will obtain an IP address automatically from DHCP server when rebooting. It's not recommended to choose
this option unless there is a reserved IP for APBX in DHCP server so that APBX can keep the same IP all the time.
Static IP
Set an IP address manually according to the real network environment. If APBX is behind a router, the gateway is
usually set to the IP of the router.

2.3 System Status

1) General
Product Model
Show the model of this APBX
Firmware Version
5 ATCOM TECHNOLOGY CO., LIMITED