Ip Configuration; Dm Tool - Crestron DigitalMedia DM-TX-200 Operations & Installation Manual

Crestron DM-TX-200
Operations & Installation Guide – DOC. 6741C

IP Configuration

For Ethernet connections, display the "System Info window (click the
select the Functions menu to display actions that can be performed on the
DM-TX-200.
When using the DM-TX-200 with a DM-RMC-100 (i.e. without a DM switcher), be
sure to use Crestron Toolbox to create the DM-TX-200 IP table.
1. Use the Device Discovery Tool to find the IP address of the DM-TX-200.
Then, in the Toolbox, display the "System Info" window and select the
DM-TX-200 entry from the Address Book.
2. Select Functions | IP Table Setup.
3. Add, modify or delete entries in the IP table. The DM-TX-200 can have
only one IP table entry.
4. A defined IP table can be saved to a file or sent to the device.

DM Tool

In the Crestron Toolbox Address Book, select the DM-TX-200. Then use the
DM Tool to configure EDID, HDCP or to troubleshoot AV on the DM-TX-200.
Refer to the help file for additional information.
DM Tool
DigitalMedia™ CAT Transmitter 200
DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 21
icon) and