Table of Contents
Advertisement
IP Table Configuration
Configuration of the IP table of the DM-TX-201-C is necessary only when the DM-TX-201-C
connects to a control system and is used in a stand-alone configuration in which it does not
connect to a DM switcher.
NOTE:
created automatically.
To create the IP table of the DM-TX-201-C in a stand-alone configuration, use Crestron
Toolbox software and do the following:
1. Using the Device Discovery Tool, find the IP address of the DM-TX-201-C.
2. In the Crestron Toolbox toolbar, click
3. In the Address Book, select the DM-TX-201-C entry.
4. In the Functions menu, select IP Table Setup.
5. In the IP table, add, modify, or delete entries.
6. Send the IP table to the DM-TX-201-C or save it to a file.
Configuration Using DMTool
DMTool in the Crestron Toolbox software allows configuration of EDID and management of
HDCP for the DM-TX-201-C. DMTool also provides detailed audio and video information
that can be used for troubleshooting. For additional information, refer to the Crestron
Toolbox help file.
8 • DM-TX-201-C: DigitalMedia 8G+ Transmitter
If the DM-TX-201-C connects to a DM switcher, the IP table of the DM-TX-201-C is
NOTE:
The DM-TX-201-C can have only one IP table.
NOTE:
The IP ID of multiple DM-TX-201-C devices in the same system must be
unique. The IP ID of each DM-TX-201-C that communicates with a control system
must match the corresponding IP ID specified in the SIMPL Windows program.
. The System Info window opens.
Supplemental Guide – DOC. 6958D
Advertisement
Table of Contents
