Crestron IM-WCVP
Hardware Hookup
Ventilation
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the table of
specifications. Consideration must be given if installed in a closed or
multi-unit rack assembly since the operating ambient temperature of the
rack environment may be greater than the room ambient. Contact with
thermal insulating materials should be avoided on all sides of the unit.
Connect the
Make the necessary connections as called out in the illustration that
Device
follows this paragraph. Turn on the system only after all connections
have been made.
Hardware Connections for the IM-WCVP
TO IM-WCVI:
CRESCAT-IM
CONNECTION
TO IM-WCVI
NOTE: For optimum performance, Crestron strongly recommends using
CRESCAT-IM cable, available from Crestron. Other high-quality/low
skew CAT5e/CAT6 wiring may also be used with varying performance.
The maximum cable length between the IM-WCVP and the IM-WCVI is
40 feet.
System Configuration
Refer to the latest version of the IM-RXV1 & IM-RXV3 guide (Doc.
6478), available from the Crestron website for iMedia system
configuration instructions.
Operations & Installation Guide – DOC. 6489
iMedia Wall Plate Control Panel
REAR
iMedia Wall Plate Control Panel: IM-WCVP • 9
GROUND