Important Safety Instructions For All Battery Packs - DeWalt DCL510 Instruction Manual

c) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Specifi c Safety Rules for Worklights
WARNING: Fire hazard. Do not operate worklight near flammable
liquids or in gaseous or explosive atmospheres. Internal sparks may
ignite fumes causing personal injury.
• Do not expose light or charger to wet or damp areas. Do not
expose light or charger to rain or snow.
• Do not wash light or charger with water or allow water to get inside
light or charger. Do not submerge light in water at any time.
• Do not operate without lens cover assembly attached.
WARNING: Do not place the worklight in a position which may
cause anyone to intentionally or unintentionally stare into the light.
Serious eye injury could result.
CAUTION: When not in use, place tool on its side on a stable
surface where it will not cause a tripping or falling hazard.
Some tools with large battery packs will stand upright on the battery
pack but may be easily knocked over.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V .............. volts
Hz ............ hertz
min .......... minutes
....... direct current
............ Class I Construction
................ ................ (grounded)
............ Class II Construction
................ (double insulated)
.../min ..... per minute
IPM .......... impacts per
................ minute
Important Safety Instructions for All
Battery Packs
When ordering replacement battery packs, be sure to include catalog
number and voltage. Consult the chart at the end of this manual for
compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using
the battery pack and charger, read the safety instructions below. Then
follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Inserting or removing the battery from the charger may ignite the
dust or fumes.
• NEVER force battery pack into charger. DO NOT modify
battery pack in any way to fit into a non-compatible charger
3
A...............amperes
W .............watts
............alternating current
............alternating or direct
.................current
n o .............no load speed
.............earthing terminal
..............safety alert symbol
BPM .........beats per minute
RPM .........revolutions per
.................minute