Table of Contents
Advertisement
Quick Links
www.weslo.com
Model No. WLTL39712.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Decal
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Weslo Cadence R 7.2 Treadmill
Summary of Contents for Weslo Cadence R 7.2 Treadmill
- Page 1 USER’S MANUAL Model No. WLTL39712.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decals may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
4. The treadmill is intended for home use only. WESLO dealer, call the telephone number on Do not use the treadmill in any commercial, the front cover of this manual, or see your rental, or institutional setting. - Page 4 20. The heart rate monitor is not a medical 24. Do not change the incline of the treadmill by device. Various factors, including the user’s placing objects under the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
-
Page 5: Before You Begin
CADENCE reading this manual, please see the front cover of this ® R 7.2 treadmill. The CADENCE R 7.2 treadmill offers a manual. To help us assist you, note the product model selection of features designed to make your workouts number and serial number before contacting us. -
Page 6: Assembly
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: After shipping, there may be an oily substance on the exterior of the treadmill. - Page 7 1. Have a second person hold the Base (85) in the position shown. Identify the Right Upright (78), which has a square hole near the lower end. Orient the Right Upright (78) as shown, and attach it to the Base (85) with two 3/8" x 2 1/4" Bolts (8) and two 3/8"...
- Page 8 4. Raise the Uprights (77, 78), and position the Base (85) near the treadmill as shown. Wire Tie See the far right drawing. Tie the wire tie in the lower end of the Right Upright (78) around the Upright Wire (74). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright.
- Page 9 6. See the left inset drawing. Identify the outer side of the remaining Frame Spacer (79). Hold the Frame Spacer (79) between the Left Upright (77) and the Lift Frame (65), with the outer side of the Frame Spacer facing the Left Upright.
- Page 10 8. Insert the wires into the Right Upright (78). Next, insert the brackets on the console assembly into Console the Right Upright and the Left Upright (77). Be Assembly careful not to pinch any wires. Attach the console assembly with four 5/16" x 3/4"...
- Page 11 11. Hold the handrail assembly near the console assembly. Connect the wire harness extending Console from the handrail assembly to the wire har- Assembly ness extending from the console assembly. See the inset drawing in step 7. The connectors should slide together easily and snap into Wire place.
- Page 12 13. Lower the Uprights (77, 78) as shown. Side View See the inset drawing. Position the Uprights (77, 78) so that the Frame (55) is centered between the Uprights. Firmly tighten the 3/8" x 2 1/2" Bolt (1) and then 77, 78 tighten the 3/8"...
-
Page 13: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same circuit. - Page 14 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE IMPORTANT: If there is a sheet of plastic on the face of the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic The treadmill console offers a selection of features shoes while using the treadmill.
- Page 15 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
- Page 16 4. Change the incline of the treadmill as desired. of calories you have burned, or the speed of the walking belt. Press the Display button repeatedly To change the incline of the treadmill, press the until the upper display shows the information that Incline increase and decrease buttons or one of you are most interested in viewing.
- Page 17 HOW TO USE A PRESET APPLICATION indicates the speed setting for the current segment. At the end of each segment, a series of tones will 1. Insert the key into the console. sound and the next segment of the profile will begin to flash.
- Page 18 THE INFORMATION MODE An E for English miles or an M for metric kilometers will appear in the lower right display. Press the Speed The console features an information mode that keeps increase button to change the unit of measurement, if track of treadmill usage information and allows you to desired.
-
Page 19: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left. -
Page 20: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by follow- SYMPTOM: The console displays remain lit when ing the simple steps below. Find the symptom that you remove the key from the console applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. - Page 21 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the a. If the walking belt is off-center, first remove the specifications described on page 13.
-
Page 22: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 23: Part List
PART LIST Model No. WLTL39712.0 R0712A Key No. Qty. Description Key No. Qty. Description 3/8" x 2 1/2" Bolt Walking Belt 5/16" x 3/4" Screw Power Cord 1/4" x 1 1/2" Bolt Power Cord Bracket 1/4" Nut Power Switch 5/16" Star Washer Power Cord Grommet 1/4"... -
Page 24: Exploded Drawing
EXPLODED DRAWING A Model No. WLTL39712.0 R0712A... - Page 25 EXPLODED DRAWING B Model No. WLTL39712.0 R0712A...
- Page 26 EXPLODED DRAWING C Model No. WLTL39712.0 R0712A...
- Page 27 EXPLODED DRAWING D Model No. WLTL39712.0 R0712A...
-
Page 28: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...