Troubleshooting - Cuisinart DGB900BCU Instruction Manual

Troubleshooting

PROBLEM
Continuous
beeping
2
CAUSE
Bean Hopper not locked in pla-
ce (when brewing with whole
beans)
Filter door not closed
Filter basket not in place
Filter basket cover not in place
Filter Basket not emptied of used
grinds
SOLUTION
• Check to see if the Bean Hopper release knob is in
the unlocked position
• Place the Bean Hopper on the unit
• Turn the knob to the locked position
• Press On/Off to resume; if programming, reset
• Check to be sure that all components of the filter
compartment are in place
• Close filter door (you will hear a click if the door is properly
shut)
• Press On/Off twice to resume; if programming, reset
• Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly
shut)
• Press On/Off twice to resume; if programming, reset
• Open filter door by pressing the filter door release button
• Put on cover, matching "grind" arrows
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly
shut)
• Press On/Off twice to resume; if programming, reset
• Open filter door by pressing the filter door release button
• Remove filter basket with cover
• Discard used grounds
• Replace filter basket with cover and close door
• Press On/Off twice to resume; if programming, reset