Adding Water & Coffee Beans - Cuisinart DGB900BCU Instruction Manual

Adding Water & Coffee Beans
ß Open the reservoir lid of the Grind & Brew Plus, pour the desired amount of water into the reservoir
using the water level indicator. Close the reservoir lid ensuring not to exceed the 12-cup line as this
may cause the carafe to over flow.
ß Lift the Bean Hopper Lid and fill with desired quantity of beans. We recommend keeping the hopper
at least half full and ensuring there is a sufficient amount of beans in the hopper for the amount of
coffee that is intended for brewing.
WARNING: Maximum capacity for the hopper is 225g. Do not over fill or you may damage the
burr grinder and/or the unit may overflow.
ß For easy filling or cleaning, the hopper can be completely removed by turning the hopper release
knob to the "un-lock" position (picture 1 below)
3
IMPORTANT: Take extra care not to spill water around the grind chamber. In the event that some
water is spilled in the chamber, dry thoroughly before use.
ß Replace the hopper lid
1. Bean Hopper release knob
1
2. Bean Hopper
2
3. Bean Hopper Lid
15