Setting The Internal Clock; Creating An On/Off Schedule For Your Slideshows; Turn Scheduled Slideshows On Or Off - Pandigital PAN5000W02 User Manual

Setting the Internal Clock

1. Calendar/Clock screen, press SETUP on the remote control to open the
Setup Menu.
2. Choose Set Clock .
3. Use the RIGHT or LEFT arrow to move to a time or date field to be
changed.
4. Use the UP and DOWN arrows to change the value in the selected field.
5. When the date and time are correct, press ENTER to set file was created
and resolution of the photo is also displayed.

Creating an ON/OFF schedule for your slideshows

You can set your digital photo frame to display slideshows at predetermined
times. For example if you have your DPF on your desk at work, you might
want to turn on the DPF from 9am to 5pm every Monday to Friday when you
are at work and to turn off during the weekends.
1. With the Calendar and Clock displayed, press SETUP . Use the Arrow
buttons to select Set On/Off Schedule and press ENTER .
2. Use the UP and DOWN arrow to set the hour you want your scheduled
slideshows to start, then use the right arrow to move to the minutes field,
set the minutes and AM/PM field in the same manner as the hours.
3. Set the time you want the slideshow to end in the same manner.
4. If you don't want to play scheduled slideshows during the weekdays.
Select the Set Always OFF field and press ENTER. The field will toggle
to the Set On/OFF Time option.
5. You can set different times for scheduled slideshows on the weekends in
the same manner.
6. When you are done with the settings, press EXIT to save them and return
to the Calendar/Clock page.

Turn Scheduled Slideshows On or Off

After you have created your slideshow schedules, you need to activate the
schedules by turning them on.
1. With the Calendar/Clock displayed, press SETUP .
17