Create A Schedule For Playing Slideshows; Turn Scheduled Slideshows On Or Off - Pandigital UG-SCF-1 User Manual

1. To set the alarm clock, open the Setup Menu and choose Clock/ Alarm
Setting.
2. Choose Set Alarm.
3. Use the RIGHT arrow to move the through the selection fields and the
Up and DOWN arrows to scroll through the values (time, Daily or Once,
Wake Up Tone (default or music).
4. When the alarm settings are correct, press the EXIT button to return to
the Clock/Alarm Setting menu.
Note: The alarm will default to Tone if the Digital Picture Frame is powered
off.
Create a Schedule for Playing Slideshows
You can set your digital picture frame to display slideshows at predetermined
times.
1. With the Calender and Clock displayed, press the Setup button.
2. Use the Arrow buttons to select Set On/Off Schedule and press ENTER.
The Set Schedule page opens with the Hours field for the Weekdays
Turn on at highlighted.
3. Use the UP or DOWN arrow to set the hour you want scheduled
slideshows to start, then use the RIGHT arrow to move to the minutes
field, set the minutes in the same manner as the hours, and then move
the highlight to the AM/PM field.
4. Use the UP or DOWN arrow button to choose AM or PM.
5. Set the time you want the slideshow to end in the same manner.
6. Press the ENTER button when Always OFF is highlighted if you don't
want to play scheduled slideshows on weekdays. The field now reads
Set Turn-On Time. Press the ENTER button to schedule weekday
slideshows.
7. You can set different times for scheduled slideshows on the weekends
in the same manner.
8. When you are happy with the settings, press the EXIT button to save
them and return to the Calendar/Clock page.
Turn Scheduled Slideshows On or Off
After you set create slideshow schedules, you need to turn slideshow
scheduling on to use the schedules.
1. With the Calendar/Clock displayed, press the Setup button.
2. Choose Start Scheduled ON/OFF, to turn the scheduling on or off.
16