Volvo V70 Owner's Manual page 162

Advanced User Mode
·
With the radio switched off, press and
hold the Volume knob at least 5 seconds to
start the AUM function.
·
Turn the 1-20/DISC button to select an
AUM function (see the function list to the
right).
·
Once you have selected a function, the
function's default will blink. Press the
1-20/DISC knob to select other alternati-
ves of the function (ON/OFF, LOW/MID/
HIGH, etc., depending on the function).
·
Continue selecting functions/alternatives.
To restore all AUM functions to factory
settings, turn the 1-20/DISC button until
"SET TO DEFAULT" shows in the radio
display. Then press the same button. All
AUM settings are then restored to their
defaults and the radio returns to its normal
mode (music, news, etc.).
To save any changes and return to the normal
mode, turn the 1-20/DISC knob until "BACK
and SAVE" is shown in the radio display.
Then press the same dial. Confirm by pressing
the 1-20/DISC knob once again.
To return to normal mode without saving any
changes, turn the 1-20/DISC knob until
"BACK without SAVE" is shown in the radio
display. Then press the same dial. Confirm by
pressing the 1-20/DISC knob once again.
Advanced User ModeAdvanced User Mode
List of AUM functions
(default is underlined)
-
SET TO DEFAULT (See left column).
-
AF SWITCHING ON/OFF (Automatic
frequency update) – The AF function makes
sure that the strongest available transmitter
for a chosen programme is used.
-
REGIONAL ON/OFF (Regional radio
programmes) – This function makes it
possible to stay tuned to a regional
transmitter even if the signals are not very
strong.
-
EON (Enhanced Other Networks)
LOCAL/DISTANT – This function is used
to indicate if the radio programme you are
listening to is to be interrupted for traffic
messages or news broadcasts (if these
functions are selected) only if the signal is
strong (LOCAL) or if the radio should also
try to pick up weaker signals (DISTANT).
-
NETWORK ALL/TUNED – This function
is used to indicate if the radio programme
you are listening to is to be interrupted for
traffic messages or news broadcasts (if these
functions are selected) only if the message
comes from the channel you are listening to,
such as P1 (TUNED), or if the programme
is to be interrupted regardless of which radio
channel the message/broadcast comes from
(ALL).
-
LANGUAGE – Select which language is
to be used in the radio display (English,
German, French or Swedish). Only works
for PTY information.
-
ASC (Active Sound Control) ON/OFF
(active volume control) – The ASC function
automatically adjusts the radio volume
according to the speed of the car.
-
ASC TABLE – Choose a level for the ASC
function (LOW/MID/HIGH).
-
SRC ON/OFF – This is used to activate/
deactivate the function that reduces the
treble when reception is poor. This might
seem like improved reception.
-
SRC TABLE - Choose a level for the SRC
function (LOW/MID/HIGH).
-
TAPE DOLBY ON/OFF – Activate/
deactivate Dolby Noise Reduction when
you listen to a cassette (HU 403/603).
-
BACK and SAVE (See left column).
-
BACK without SAVE (See left column).
159