Volvo V70 Owner's Manual page 122

Main beam bulb (HB3)
·
Switch off all lights and turn ignition key to
position 0!
·
Open the bonnet.
·
Remove the cover by twisting it anticlockwise.
·
Twist the bulb holder anticlockwise, pull it
out and fit a new bulb. Note its position.
·
Refit the bulb holder. It can only be fitted in
one way.
·
Screw the cover back into place, Screw the
cover back on. The word "TOP" should be
uppermost.
Replacing bulbs
Dipped beam bulb – H 7
3501078m
Main beam bulb – HB 3
Bi-Xenon - D2R
WARNING!
If your car is equipped with Bi-Xenon
headlamps (option), the bulbs must be
replaced by an authorised Volvo workshop
due to the high voltage.
NOTE: Because Bi-Xenon lamps contain a
little bit of mercury they must be handled
correctly. Consult your Volvo dealer or Volvo
workshop.
119