8901672m
Position of load carriers
Make sure that the load carriers are placed the
right way round on the roof rails. The load
carriers can be placed anywhere along the roof
rail.
When driving without a roof load, the front
load carrier should be positioned about 50 mm
in front of the centre roof mounting and the
rear load carrier positioned about 35 mm in
front of the rear roof mounting (illustrated
above). This is to keep wind noise to a
minimum.
Roof loads - roof railsrails and the load carriers
Fitting the load carriers
Make sure that the load carrier is pressed
firmly out against the roof rail. Screw the load
carrier in place. Use the supplied torque
wrench, tightening to the mark on the wrench
(corresponding to 6 Nm). See illustration!
8901671d
Load carrier cover
Use the lug on the on the torque wrench (see
illustration) or the ignition key to unscrew or
secure the cover. Turn a quarter turn.
8901878m
105