Reebok 1210 Elliptical Manual page 12

10. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four M4 x
16mm Screws (101).
11. Orient the Right Pedal Arm (58) assembly as
shown.
Apply grease to the axle on the Right Pedal
Arm (58).
Attach the Right Pedal Arm (58) to the Right
Roller Arm (59) with an M8 x 13mm Screw
(82), a Small Axle Cover (55), and an M8
Washer (97). Tip: Avoid damaging the Small
Axle Cover when tightening the Screw.
Repeat this step for the Left Pedal Arm
assembly (not shown).
10
4
101
11
82
59
55
97
12
7
Avoid pinching
the wires
101
58
Grease