Reebok 1210 Elliptical Manual page 11

8. Identify the Right Upper Body Arm (61) and ori-
ent it as shown.
Slide the Right Upper Body Arm (61) onto the
Right Upper Body Leg (60).
Attach the Right Upper Body Arm (61) with two
M8 x 38mm Bolts (96) and two M8 Locknuts
(102). Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step for the Left Upper Body
Arm (47).
9. Untie and discard the wire tie on the Main
Wire (111).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (111), to the Ground
Wire (110), and to the Sensor Wires (63, 136).
Insert the excess wire into the Upright (4).
8
47
102
61
96
9
7
136
111
110
11
Hexagonal
Holes
60
63
4