PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
M10 Washer (30)
M8 Washer (27)
M6 Washer (28)
M10 Nylon
Locknut (2)
M8 Nylon
Locknut (29)
M6 x 25mm
Screw (21)
M8 x 40mm Bolt (25)
M6 x 45mm Screw (22)
M6 x 60mm Screw (24)
M8 x 70mm Carriage Bolt (26)
5
M4 x 15mm
Screw (20)
M8 x 15mm
Screw (19)