ProForm 500 Ekg Elliptical User Manual page 5

2. Whilst another person lifts the back of the Frame (1),
attach the Rear Stabiliser (28) to the Frame with two
M8 x 53mm Button Bolts (34), two M8 Washers (48),
and two M8 Nylon Locknuts (38).
3. The Console (23) requires four 1.5V "D" batteries;
alkaline batteries are recommended. Remove the
screw from the battery drawer, pull the battery drawer
open, and insert four batteries. Make sure that the
batteries are oriented as shown by the markings
inside the battery drawer. Close the battery drawer
and reattach the screw.
4. Have another person hold the Console (23) in the
position shown. Connect the console wire to the Upper
Wire (44). Next, insert the excess wire down into the
Upright (2).
Attach the Console (23) to the Upright (2) with four M4
x 20mm Screws (43). Be careful to avoid pinching
the wires.
2
48
3
Screw
4
43
5
34
1
28
48
38
23
Batteries
23
Console Wire
44
2