How To Connect Your Computer; How To Connect Your Vcr - Pro-Form 470 Cx Treadmill User Manual

HOW TO CONNECT YOUR COMPUTER

A. Plug one end of a long 3.5mm to 3.5mm stereo
audio cable (available at electronics stores) into the
input jack on the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
Note: While the cable is plugged into the LINE OUT
jack, do not plug your headphones into the head-
phone jack on the console.
A
LINE OUT
Audio Cable
A

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
A. Plug one end of a long 3.5mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the AUDIO OUT jack on your VCR.
A
B. Plug one end of a long 3.5mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-Adaptor (available at electronics
stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR and
plug the wire into the unused side of the Y-Adaptor.
Plug the Y-Adaptor into the AUDIO OUT jack on
your VCR.
B
Audio Cable
Wire removed from
AUDIO OUT jack
17
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
AUDIO OUT
RIGHT
LEFT
VIDEO AUDIO
IN
CH
3 4
Audio Cable OUT
AUDIO OUT
RIGHT
A
LEFT
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
A
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
B
RCA
Y-Adaptor
B
ANT. IN
RF OUT