Vca - Profiles; Aggregation Time [S] - Bosch FW5.50 Software Manual

Camera Browser Interface
12.2

VCA - Profiles

Two profiles can be set up with different VCA configurations.
You can save profiles on your computer's hard drive and load
saved profiles from there. This can be useful if testing a number
of different configurations. Save a functioning configuration and
test new settings. Use the saved configuration to restore the
original settings at any time.
1.
2.
3.
4.
To rename a profile:
1.
2.
The current alarm status is displayed for information purposes.
12.2.1

Aggregation time [s]

Set an aggregation time of between 0 and 20 seconds. The
aggregation time always starts when an alarm event occurs. It
extends the alarm event by the value set. This prevents alarm
events that occur in quick succession from triggering several
alarms and successive events in a rapid sequence. No further
alarm is triggered during the aggregation time.
The post-alarm time set for alarm recordings only starts once
the aggregation time has expired.
Bosch Security Systems
In the VCA configuration drop-down list, select profile 1 or
2 and enter the required settings.
If necessary, click Default to return all settings to default
values.
Click the Save... to save the profile settings to another file.
A new window opens where you specify the file name and
the location.
Click Load... to load a saved profile. A new window opens
where you select the location and the profile file.
To rename the file, click the icon to the right of the list field
and enter the new profile name in the field.
Click the icon again. The new profile name is saved.
Software manual
Setting up VCA | en
AM18-Q0611 | v5.50 | 2012.03
69