Encoder; Audio; Recording; System Overview - Bosch FW5.50 Software Manual

Camera Browser Interface
5.4

Encoder

Select a profile for encoding the video signal on stream 1 (this
is not a selection of the recording profile).
Pre-programmed profiles are available that give priority to
different parameters and they should be selected based on
your operating environment.
When a profile is selected, its details are displayed.
Main frequency and Operation environment
Select 50 Hz or 60 Hz as the main frequency, and Indoor or
Outdoor for the operation environment.
5.5

Audio

(only for cameras with microphones)
Switch the camera microphone On or Off.
5.6

Recording

(only for cameras with a storage medium)
Record the images from the camera to a storage medium. For
long-term authoritative images, it is essential to use VRM or an
appropriately sized iSCSI system.
Storage medium
1.
2.
5.7

System Overview

This page provides general information on the hardware and
firmware system, including version numbers. No items can be
changed on this page but they can be copied for information
purposes when troubleshooting.
Bosch Security Systems
Select the required storage medium from the list.
Click Start to start recording or Stop to end recording.
Software manual
Basic Mode | en
AM18-Q0611 | v5.50 | 2012.03
27