Installation Procedure; Releasing The Enclosure Base; Lifting The Keypad From The Enclosure Base; Removing The Enclosure Base - Bosch D1255RB/D1256RB/D1257RB Installation Instructions Manual

D1255RB/D1256RB/D1257RB | Installation Instructions | 3.0
3.3

Installation Procedure

1. Power down the control panel.
2. Using a small flat-bladed screwdriver, gently push
the two bottom tabs up and in to release the
enclosure base. Refer to Figure 2.
Use caution to avoid damage to the tabs
and hinges.
Figure 2:

Releasing the Enclosure Base

1 - Screwdriver
2 - Tabs
3 - Enclosure base
3. Gently lift the unit from the enclosure base as the
tabs are pushed in.
Figure 3: Lifting the Keypad from the Enclosure
Base
1 - Enclosure base
2 - Tabs
6
Installation
4. Gently pull the keypad apart from the enclosure
base at the top hinges.
Figure 4:

Removing the Enclosure Base

1 - Enclosure base
2- Top hinges
5. Lift and remove the red cover.
Figure 5:

Lifting the Red Cover

Bosch Security Systems, Inc. | 8/06 | F01U011791B