Assembly - Bissell DEEPCLEAN LIFT-OFF User Manual

Assembly

Your deep cleaner comes in two easy to
assemble components:
A. Upper handle
B. Portable spot cleaner/Base
The only tool you will need to assemble your
cleaner is a long Phillips screwdriver.
1. slide the upper handle onto the body of
the machine by guiding the 2 posts on the body
into the opening on the upper handle.
2. Firmly holding the upper handle in place,
screw 2 screws into the marked holes at an
upward angle above the support handle.
3. At an upward angle, screw the remaining
2 screws into the marked outermost holes
under the support handle.
4. Wrap power cord around Quick Release
Cord Wrap.
5. Wrap flex hose around the hose wrap and
secure with hose secure latch.
6. Align the product as image 4/5 shows and
firmly push down the portable spot cleaner
until it is secured on both sides.
To further check if the portable spot cleaner
is secure, plug in and turn on to verify that
the upright cleaning mode indicator light is
illuminated. if it does not illuminate, release the
pod and re-secure by pushing firmly until both
sides snap into place.
7. Check latches on both sides to confirm
it is secured. Refer to image 6.
8. snap attachment(s) into the back of unit.
notE: portable spot cleaner must be fully
secure to operate in the upright cleaning mode.
cleaning fluid
Keep plenty of genuine bissell 2X cleaning
formula on hand so you can clean and protect
whenever it fits your schedule. Always use
genuine bissell deep cleaning formulas.
Non-bissell cleaning formulas may harm the
machine and will void the guarantee.
1.5 L 2X Wash & Protect 1.5 L 2X Wash &
PRO Professional Protect PET Pet Stain
Stain & Odour & Odour Formula
Formula w/ w/ Scotchgard
™
Scotchgard Protector Protector
#1089E #1087E
IMPORTANT
ASSEMBLY INSTRUCTIONS
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
Slide the upper handle onto Firmly holding the upper
the body of the machine by handle in place, screw 2
guiding the 2 posts on the screws into the marked
body into the opening on holes at an upward angle
the upper handle. above the support handle.
1.5 L 2X Wash
& Protect Stain
& Odour Formula
™
w/ Scotchgard ™
Protector
#1086E
WaRnInG
Do not plug in your cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
a.
ASSEMBLY INSTRUCTIO
1.
Slide the upper handle onto Slide the upper handle onto
the body of the machine by the body of the machine by
3.
guiding the 2 posts on the guiding the 2 posts on the
body into the opening on body into the opening on
the upper handle. the upper handle.
At an upward angle, screw
the remaining 2 screws into
6.
the marked outermost holes
under the support handle.
WaRnInG
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner.
1.5 L 2X Wash & 1.5 L 2X Wash &
Refresh Blossom &
Refresh Cotton
Breeze Fragrance Fresh Formula w/
Formula w/
Febreze® Freshness
#1079E
Febreze® Freshness
#1078E
B.
IMPORTANT IMPORTANT
ASSEMBLY INSTRUCT
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assemb Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver f
2.
Firmly holding the upper Firmly holding the upper
handle in place, screw 2 handle in place, screw 2
4./5.
screws into the marked screws into the marked
holes at an upward angle holes at an upward angle
above the support handle. above the support handle.
Cord
side
1.5L 2X Wash 650 mL
& Refresh Natural Stain Pretreat
#1147E
Orange Formula
#1146E
www.bissell.com
At an upward At an
the remaining the re
the marked o the m
under the sup under
Hose
side
5