Switching The Display On/Off - Alpine NVE-N055PS Owner's Manual

Before using this system

Switching the display on/off

With this system, when the display monitor is set in the navigation display mode
or external input display mode and the ignition key is turned to the ACC or ON
positions, the opening screen will automatically appear.
After the opening screen is
1-1
displayed, important information
saying "Please be sure to read this!"
is displayed. Be sure to read it.
1-2
If the language has not been selected
yet, the language selection menu is
displayed. Select (highlight) the
desired language by tilting the
joystick. Then press the ENTER
button.
2
After you have read this important
information, press the ENTER button.
The map screen is displayed.
3
With the map displayed, press the OFF
button to turn off the monitor.
If you press the ON button, the opening screen is
displayed.
Tips
14 14
ENTER
ENTER
OFF
a If there is no disc in the navigation system, "Please insert map CD ROM" is
displayed. For details on how to load the disc, see "Inserting a disc" and
"Removing a disc" on page 12.
a If the disc cannot be read, the "CD ROM unreadable. Please check CD ROM"
message is displayed. Try reloading the disk and if the problem cannot be cured,
return to an authorized Alpine dealer.
a If the monitor is kept on with the engine off for an extended period of time, the
vehicle's battery may discharge.
a Operation varies depending upon the disc version in use. For details, refer to the
manual for the CD ROM.