Switching The Display On/Off - Alpine NVD-A101 SMART MAP PRO Owner's Manual

Switching the display on/off

When the ignition key is turned to the ACC or ON positions, the opening screen will automatically
appear.
After the opening screen is displayed,
1
important information will be displayed.
Make sure that it is read carefully.
(If you have the CVA-1000/CVA-1005
system control monitor, the opening screen
may not be displayed.)
2
After you have read this important
information, press the ENTER button.
The map screen is displayed.
3
From any screen or menu, you may
switch the external monitor or CVA-
1000/CVA-1005 type unit's NAV source
off by pressing the DISP ON/OFF button
on the remote.
When you press the DISP ON/OFF
button again, the display turns back on.
a If the DVD-ROM is not inserted in the navigation system, "Please insert DVD-ROM." is
displayed. For details on how to load the DVD-ROM, see "Inserting the DVD-ROM" and
"Removing the DVD-ROM" in the navigation system's Hardware Manual.
a If the DVD-ROM cannot be read or is inserted incorrectly, "Error reading DVD-ROM." will be
displayed on the screen. Try reloading the DVD-ROM correctly. If the message does not
disappear, contact your local Alpine navigation dealer.
a If the navigation system display is kept on with the engine off for an extended period of time,
the vehicle's battery may discharge. Make sure the system is turned off when you leave the
vehicle.
12
ENTER
DISP
ON/OFF