Setting A Destination Directly From Map Display; Switching Map Display - Alpine PMD-B100 - Blackbird Owner's Manual

261985 PMD-B100_r15.qxd

Setting a Destination Directly from Map Display

1 Touch anywhere on map screen.
The current location arrow changes to Crosshair
Cursor on the screen.
2 Move the cursor to the new desired
street.
Note:
Use Map Scale Bar to zoom out the map
if the destination is far from the current location.
3 Touch
4 Select Set as
Touch OK to Proceed
5
tion screen.
Note:
To use other functions on the confirmation
screen, see page 14 for details.

Switching Map Display

Touch the Current Position
modes. You may also configure the system to switch between Map
and Split screen modes (see page 29).
Route Mode
= Arrow
(default mode)
Route Mode
= Split
9/13/06 3:15 PM
.
Destination.
on the confirma-
Map Mode
Shows a full-screen
map of the area while
providing turn-by-turn
guidance prompts.
Page 13
To cancel, touch
Previous Screen
to switch between Map and Arrow
icon.
Arrow Mode
Displays three-
successive arrow
maneuvers all the
way to your desti-
nation while pro-
viding turn-by-
turn guidance
prompts.
Split Arrow/
Map Mode
Displays a large
arrow and larger
next-street-name
font along side a
map screen while
providing turn-by-
turn guidance
prompts.
13