Setting The Scroll; Setting The Language; Adjusting The Dimmer Of Button Lighting At Night; System Setup - Alpine iXA-W407BT Owner's Manual

Setting the Scroll

Scroll display is available if folder name, file name or tag information is
entered.
Setting item: Auto Scroll
Setting contents: OFF / ON
OFF: Turns off the AUTO scroll mode. Scroll display is done
once as a track is changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPhone/iPod is
connected.

Setting the Language

Seven types of font can be selected.
Setting item: Language Select
Setting contents: CHI / JPN / ARA / THA / W-EU / RUS1 / RUS2
CHI: Chinese Font Display
JPN: Japanese Font Display
ARA: Arabic Font Display
THA: Thai Font Display
W-EU: Normal Font Display (ISO8859-1)
RUS1: Russian Font Display (WINDOWS-1251)
RUS2: European Font Display (WINDOWS-1252)
• When "CHI (Chinese)" is selected from "Language Select", Chinese
font (GB2312) is used and displayed. If you select other than "CHI
(Chinese)", another font is used.
A Unicode file can be displayed regardless of the setting (excluding
Chinese). However, a 1-byte character code file may not display
accurately. Please set according to the target language.
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED Dimmer Level
Setting level: -2 to +2
20
-EN

System Setup

System Setup Operation

The Parking Brake must be engaged to access the System mode
screen. Attempting to access this screen while driving will display
the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
"Setting item" of System Setup. Refer to each section for details.
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of System Setup.
The SYSTEM SETUP screen appears.
3
Touch [ ] or [ ] or [
change its setting.
Setting items:
1
*
IN Int. Mute / IN Int. Icon / Remote Sensor
3
*
Camera Signal / NAV. IN / NAV. Mix
AUX OUT / Bluetooth IN / USB Adapter / Option Key
1
* Displayed only when Bluetooth IN is OFF.
2
* When ON is set in "Setting the Picture Output" (page 22), the item is
displayed.
3
* Not displayed when OFF is set in "Setting the Rear Camera Input"
(page 21).
4
* When ON is set in "Setting Navigation Mode" (page 21), the item is
displayed.
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
] etc., of the desired item to
2
*
/ Camera IN /
4
*
/ AUX1 IN / AUX2 IN /