Bluetooth Operation; Setup Before Using; About Bluetooth; Before Using Hands-Free Function - Alpine iXA-W407BT Owner's Manual

BLUETOOTH
Operation

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Homepage (http://www.bluetooth.com/).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the
connected device(s).

Before Using Hands-Free Function

Before using the hands-free phone/audio function, the following
settings need to be made.
1
Set "Bluetooth IN" to BUILT-IN (page 23).
2
Turn the ignition key off (ACC OFF) and on again
(ACC ON).
• Before using a hands-free phone, it must be paired with this unit.
Refer to "BLUETOOTH Setup" (pages 40-42).
40
-EN
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device,
refer to the Owner's Manual of the BLUETOOTH compatible device.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
2
The PIN code ("0000") is displayed on the unit.
3
Input the PIN code ("0000") in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, "CONNECTED/
(Device name)" is displayed, and then the unit
returns to normal mode.
• Set "Setting the Search Mode" (page 41) to Visible Mode ON to
enable a mobile phone to recognize this unit. For mobile phone
passkey (passcode) input operation, refer to the mobile's Owner's
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to "Registering the BLUETOOTH Device"
(page 41).
• If a BLUETOOTH compatible device is successfully connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.

BLUETOOTH Setup

BLUETOOTH Setup Operation

The following steps 1 to 3 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
• While calling, or in the BLUETOOTH Audio source, BLUETOOTH
Setup operation cannot be performed.
• Set "Bluetooth IN" to BUILT-IN, and then perform BLUETOOTH
Setup operation.
1
After steps 1 and 2 in "Source Setup Operation"
(page 16) have been performed, touch [
Bluetooth Setup.
The BLUETOOTH SETUP screen appears.
2
Touch [ ], [ ] or [
change its setting.
Setting items:
Paired Device / Device Search / Clear Device /
Service Provider / Visible Mode / Auto Answer / Speaker Sel /
Mic Input / Firmware Version / Firmware Update
3
Touch [ ] on the left side of screen to return to the
previous screen.
Touch and hold [ ] on the left side of screen for at least 2
seconds to return to the main source screen that was
displayed before the setup operation was started.
] of
] of the desired item to