General Setting; Connecting An Mp3 Changer (Play Mode); Sound (Beep) Guide Function (Ida-X200 Only); Turning Mute Mode On/Off (Int Mute) - Alpine iDA-X300 Owner's Manual

General Setting

GENERAL is selected on the setup main menu in step 2.

Connecting an MP3 Changer (PLAY MODE)

CD-DA (Initial setting) / CD-DA&MP3
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
CD-DA : Only CD data can be played back.
CD-DA&MP3 : Both CD data and MP3 file tracks can be played
back.
• Change discs after performing this setting.

Sound (Beep) Guide Function (iDA-X200 only)

Beep On (Initial setting) / Beep Off
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT MUTE)

INT MUTE ON / INT MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to ADPT, INT MUTE cannot be set. Refer to
"Setting the Bluetooth Connection" (page 22).
• When the Bluetooth box is connected, set INT MUTE to OFF.

Setting the AUX+ Mode

AUX+ ON / AUX+ OFF (Initial setting)
You can input the audio of a connected external device, (such as a
portable player) to the iPod Direct connector of this unit, using an iPod
Direct/RCA Interface cable.
An external device and an iPod cannot be connected at the same time.
AUX+ ON : Set to ON when an external device is connected. If
SOURCE is pressed and AUX+ is selected, the
sound of the external device is input to the unit.
AUX+ OFF : Set to OFF when an iPod is connected.

Setting the AUX+ NAME Mode

AUX (Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX+ NAME when AUX+ is ON.

Setting the AUX Mode (V-Link)

AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
/ENTER when AUX is set to ON, and select AUX NAME by
turning the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only), then press
After that, turn the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only) to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
then press BAND/ TA to select your desired device.

Setting the External Digital Input (DIGITAL AUX)

DIGITAL AUX ON / DIGITAL AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5.1-channel
surround sound.
You can change the D-AUX Name when DIGITAL AUX is set to ON.
Press /ENTER when DIGITAL AUX is set to ON, and select
D-AUX NAME by turning Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only), then press
• Press SOURCE, and select the D-AUX mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.

Setting the AUX+ Level (AUX IN GAIN)

LOW (Initial setting) / HI
After setting to ON in "Setting the AUX+ Mode", this setting can be
carried out.
LOW: Decreases the external input audio level.
HI: Increases the external input audio level.
/ENTER.
SOURCE to select AUX mode and
/ENTER.
23
-EN