Playback; Selecting A Disc (Changer) (Optional); Multi-Changer Selection (Optional); Repeat Play - Alpine iDA-X300 Owner's Manual

2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only).
Select the desired BANK.
You can scroll the page by pressing and turning the Double
Action encoder (iDA-X200 only).
3
Press /ENTER.
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different BANK.

Playback

1
Press SOURCE to select the USB AUDIO or CD
CHANGER mode.
2
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
• When a Portable audio player is connected, fast-forwarding/fast-
reversing is not available.
3
To pause playback, press
Pressing / again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• "NO SUPPORT" is displayed when text information is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.

Selecting a Disc (Changer) (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 14 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
14
-EN
/ .
1
Press PRESET.
The DISC CHANGE screen is displayed.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a disc.
You can scroll the page by pressing and turning the Double
Action encoder (iDA-X200 only).
3
Press /ENTER.
The selected disc number appears in the display and
CD/MP3/WMA/AAC playback starts.

Multi-Changer Selection (Optional)

When using KCA-410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
1
Press SOURCE on this unit to activate the CD
CHANGER mode.
2
Press BAND/TA to activate the CD Changer
Selection mode.
The CD Changer Selection mode remains active for several
seconds.
3
Press BAND/TA until the desired CD Changer
appears on the display.
• For further details about the external input (AUX) when using
KCA-410C, see "Setting the AUX Mode (V-Link)" on page 23.

Repeat Play

1
Press FUNC./SETUP.
2
Press /ENTER.
The repeat mode is activated.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
Repeat playback mode.
USB memory mode :
REPEAT ONE
FOLDER
OFF
Portable audio player mode (iDA-X200 only) :
REPEAT SONG
OFF
: Only a track is repeatedly played
back.
: Only files in a folder are repeatedly
played back.
: Repeat mode is turned off.
: Only a track is repeatedly played
back.
: Repeat mode is turned off.