Release Notes, May, 2013 (Differences From Release A.02.00); Release Notes, January, 2013 (Differences From Release A.01.80) - Agilent Technologies 86100A Release Notes

• :MEASure:JITTer:TJHist:SAMPles?
• Improvements added to eye measurement algorithms.
• Support added for N1012A OIF CEI 3.0 Compliance and Debug Application version
• Skew calibration added for 86118A H01 modules.
• Fixture deskew added for 86118A H01 modules.
• Ability to open legacy Color Grade- Gray Scale memory files (.cgs).
• FlexDCA is now the 86100D's default user interface. The 86100D can be placed
• For working offline, the DCA's data simulation state is now integrated with
• Added two example programs for performing calibrations. Each program illustrates
N O T E
• Ability to use one- slot mini modules.
• Added new N1045A one- slot mini- module with two or four remote electrical
• Extended Module feature to control supported external instruments (via LAN)
• Added automatic fixture deskew.
• Added Skew Calibration to remove difference in electrical length between the
• Added automatic differential deskew to apply Hardware Skew to two differential
• Added probe support and setup to Standard configuration.
• In Standard configuration, the 86100D supports SCPI connectivity via GPIB, VXI-
• Ability to adjust the 86100D front- panel calibration output (DC Cal) voltage.
• Added Absolute and Square Root math operators.
• Added Decision Feedback Equalizer and Sin(X)/X signal- processing operators.
• Support for the N1014A SFF- 8431 Compliance Application.
• Added Undo, Redo, and History.
• Added new Ethernet Mask: 100G- SR10 10.3125
• Added new OIF- CEI masks and SFF- 8431 masks.
A.02.02 Release Notes, May, 2013
(Differences from Release A.02.00)
General Comments
2.00.
New Feature List
A.02.00 Release Notes, January, 2013
(Differences from Release A.01.80)
General Comments
in one of three configuratons: Standard, Hybrid, or Legacy.
standard live channels. Open FlexDCA normally without using a command- line
switch.
a different method of controling execution timing.
FlexDCA is compatible with Windows XP and Windows 7 but is not compatible with Windows 8.
New Feature List
heads.
such as the N4877A clock data recovery and demultiplexer.
remote sampling heads on N1045A and 86118A- H01 modules.
channels.
- 11 LAN, Telnet, Sockets, and HiSlip.
N1010A FlexDCA and 86100A/B/C/D
Firmware Release Notes
7