Table of Contents
Advertisement
3–4
Printing with Your SuperScript 610plus
To make certain the settings are the same for all your
Windows based applications, use the Windows
Control Panel to open the Printer Setup screens and
change your settings.
You can set options for GDI mode by using the
Control Panel in Windows:
1. Switch to the Program Manager. You should see
a window titled Main. If this window has been
minimized, restore it.
2. Double-click on the Control Panel icon in the
Main window.
3. Double-click on the Printers icon in the Control
Panel window.
4. Select NEC SuperScript 610plus GDI on
NEC.GDI
5. Click on the Setup button.
Advertisement
Table of Contents
