ProForm 3.9 Xm Treadmill User Manual page 7

2. Have a second person orient the Base (48) as
shown.
Identify the Left Upright (31), which has a large
hole near the bend.
Orient the Left Upright (31) as shown, and at-
tach it to the Base (48) with two 3/8" x 2 1/4"
Bolts (27) and two 3/8" Star Washers (39); do
not tighten the Bolts yet.
3. Orient the Right Upright (36) as shown, and at-
tach it to the Base (48) with two 3/8" x 2 1/4"
Bolts (27) and two 3/8" Star Washers (39); do
not tighten the Bolts yet.
4. Set the Base (48) near the front of the treadmil.
Cut the tie (not shown) securing the Upright Wire
(28) in a bundle. Discard the tie.
Locate the long tie in the Right Upright (36).
Wrap the tie securely around the connector on
the Upright Wire (28), and insert the connector
into the large hole in the Right Upright. Then,
pull the opposite end of the tie until the Upright
Wire is pulled through the Right Upright.
2
Bend
48
Large Hole
3
Bend
36
4
7
31
39
39
48
39
39
36
36
28
Tie
48
27
27
28