Operation And Adjustment; The Performant Lube Walking Belt; How To Plug In The Power Cord - ProForm 12.5 qm User Manual

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE
Your treadmill features a walking belt coated with PERFORMANT LUBE
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and an earth-
ing plug.
Two power cords are included. Select the one that will fit your
outlet. Refer to drawing 1. Plug the indicated end of the power
cord into the socket on the treadmill. Next, lift the tab on the
ferrite box and clamp the ferrite box around the power cord.
The ferrite box should not be allowed to slide along the power
cord. Fasten the included plastic tie just behind the ferrite box
and cut off the excess plastic tie. Refer to drawing 2. Plug the
power cord into an appropriate outlet that is properly installed
and earthed in accordance with all local codes and ordinances.
If the power cord is damaged, it must be replaced with a manufac-
turer-recommended power cord.
DANGER:
equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to
whether the product is properly earthed. Do not mod-
ify the plug provided with the product—if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
TM WALKING BELT
Improper connection of the
TM , a high-performance lubricant. IMPOR-
1
2
9
Socket on treadmill
Ferrite Box
Plastic
Tie
Tab
Outlet