Maintenance - Epic Fitness A30t Treadmill Manual

SYMPTOM: The walking belt is off-center or slips
when walked on
a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclock-
wise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
a

MAINTENANCE

Inspect and tighten all parts of the treadmill regularly.
Replace any worn parts immediately.
CLEANING
To clean the treadmill, first press the power switch
into the off position and unplug the power cord.
Wipe exterior parts of the treadmill with a damp cloth
and a small amount of mild soap. IMPORTANT: Do
not spray liquids directly onto the treadmill. To
avoid damage to the console, keep liquids away
from the console and keep the console out of
direct sunlight. Then, thoroughly dry the treadmill with
a soft towel.
b. If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walk-
ing belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walk-
ing belt is properly tightened.
b
STORAGE
If the treadmill will not be used for an extended period
of time, lay the power cord over the treadmill where it
will not be pinched or crushed, and cover the treadmill
to keep it free of dust. To save space, you may want
to fold the treadmill (see page 24). Store the treadmill
indoors. Do not store objects on the treadmill.
27