Using The Components; Switching The Components On/Off - Sennheiser ew 300 G2 Instructions For Use Manual

18

Using the components

Switching the components on/off

ew 300 G2 transmitters and receivers can only be switched off when the
standard display is shown on the display panel. Within the operating menu,
the ON button (receiver) or the
ESC (cancel) key, i.e you cancel your entry and return to the standard display.
Note:
Remove the batteries or the accupack when the units will not be used for
extended periods of time.
Switching the rack-mount receiver on/off
Press the ON button
To switch the receiver off, press the
display.
Switching the bodypack transmitter on/off
Press the two unlocking buttons
cover .
Press the ON/OFF button
red LED lights up.
To switch the bodypack transmitter off, press the
"OFF" appears on the display. The red LED
Close the battery compartment. The battery compartment cover
into place with an audible click.
Switching the radiomicrophone on/off
Turn the protective cap
the ON/OFF button becomes accessible.
Press the ON/OFF button to switch the radiomicrophone on. The red
LED lights up.
To switch the radiomicrophone off, press the
"OFF" appears on the display. The red LED
ON/OFF button (transmitters) serves as the
to switch the receiver on.
ON button until "OFF" appears on the
and open the battery compartment
to switch the bodypack transmitter on. The
ON/OFF
goes off.
at the bottom of the radiomicrophone so that
ON/OFF
goes off.
button until
locks
button until