Adjusting The Sensitvity (Transmitter Only) - Sennheiser EMP 2015 Instruction Manual

SenSit
60

Adjusting the sensitvity (transmitter only)

If the microphone sensitivity is not adjusted correctly, the speaker's voice
can sound distorted or noisy. Distortion occurs if the microphone sensitivity
is adjusted too high. In this case, the transmitter's yellow audio peak indication
LED lights up . If, on the other hand, the sensitivity is adjusted too low,
the teacher's voice will be overlaid with background noise.
Adjust the sensitivity so that the yellow audio peak indication LED
lights up during the loudest passages.
The following figures are a guide to the best settings:
ME 3 headmic:
ME 2 and ME 4 microphones (accessories):
External sound sources (e.g. CD player):
Press the SET button to select the "SEnSit" menu. "SEnSit" appears on
the display; after a short pause the current input sensitivity setting is
indicated.
With the buttons you can now select a different setting. The sensitivity
/
can be adjusted in 10-dB steps from 0 to -30 dB. The new setting starts
flashing on the display and becomes effective immediately.
Press the SET button to return to the top menu level. The display then
switches back to the standard display.
-10 dB
0 dB
-30 / -20 dB
only