Fluke ScopeMeter 190-502 User Manual page 44

Fluke 190 Series II
Users Manual
Measuring Resistance Values
To measure a resistance, do the following:
1 Connect the red and black test leads from the
4-mm banana jack inputs to the resistor.
2 Display the
METER
3 Open the
F1
4 Highlight Ohms.
5 Select Ohms measurement.
ENTER
36
key labels.
METER
menu.
MEASUREMENT
www.
Shop for Fluke products online at:
The resistor value is displayed in ohms. Observe also that
the bargraph is displayed. (See Figure 15.)
Figure 15. Resistor Value Readings
MyFlukeStore
1.877.766.5412
.com