Fluke ScopeMeter 190-502 User Manual page 157

Select DELETE with the up/down
3
arrow keys.
Press ENTER.
4
ENTER
Press F2 – SELECT ALL.
5
F2
Press ENTER.
6
ENTER
Press F4 – YES to confirm the Clear
7
F4
action.
If the test tool is not powered through its Power Adapter
removing the battery for 10 minutes will clear all data
stored in SRAM. For this proceed as follows: disconnect
the Test Tool from all voltage sources, open the battery
door present at the rear panel and lift the battery out of
the instrument.
Shop for Fluke products online at:
MyFlukeStore
www. .com
Appendices
Instrument Security Procedures
1.877.766.5412
C
C-3