System Problems - Gateway 7450R System Manual

Probable cause
The printer is not designated
as the default printer
The printer has not been
added to the system

System problems

The system will not start up
Probable cause
The system is not connected to
an AC outlet
The system is non-responsive
Probable cause
An error occurs during an
application or the server
may be out of memory
The keyboard does not work
Probable cause
A key was pressed while the
system was starting up
The keyboard is not plugged
in or connected properly
Something spilled into the
keyboard
The keyboard is defective
Solution
If the printer that you are trying to print to is not the
default printer, make sure that you have selected it
through the program printer setup function.
In the Printers window (Start | Settings | Printers),
double-click Add Printer. Follow the on-screen
instructions for adding the new printer.
Solution
Make sure that the power cable is connected to an
operating AC power source.
Solution
Press and hold in the power button for 4 seconds to turn
the system off. Turn the system back on, then follow the
on-screen instructions.
Solution
Clear the sticking key, then turn off the system, wait for
a few seconds, then turn the system back on.
Make sure the cable is properly connected.
Turn off the system. Turn the keyboard upside down to
drain it, then turn is right-side up to let it dry before using
the keyboard again.
Try a keyboard that you know is working.
Troubleshooting
85