6-2.Adjusting Clock - Carrier MMK-AP0073H2UL Owner's Manual

High Wall Type
6-2. Adjusting Clock
Setting the clock
Before operating the air conditioner, set the clock of
the remote control by following the procedures
given in this section. The clock panel on the remote
control will indicate the time regardless of whether
the air conditioner is in use or not.
Initial setting
When batteries are inserted in the remote control
the clock panel will indicate AM 0:00 and will flash.
1
TIMER or
ON
Press the TIMER
time.
Each press of the TIMER button changes the time in
one minute steps.
Pressing the TIMER button continually changes the
time in ten minute steps.
2
SET button
SET
Press the SET
The current time is indicated and the clock starts.
13-EN
TEMP
CLR
SLEEP SET
button
OFF
or button to set the current
OFF
ON
button.
SET
Clock adjusting
1
CLOCK button
Press the CLOCK
The CLOCK display flashes.
2
TIMER
Press the TIMER
1
time.
Each press of the TIMER button changes the time by
one minute.
2
Pressing the TIMER button continually changes the
time by ten minutes.
3
SET
Press the SET
The current time is indicated and the clock starts.
– 13 –
TEMP
CLR
SLEEP SET
by tip of a pencil.
or button
ON OFF
or button to set the current
ON OFF
button
SET
button.
SET
Owner's Manual
2
3
1