6-5.Wireless Remote Control - Carrier MMK-AP0073H2UL Owner's Manual

High Wall Type
6-5. Wireless Remote
Control
Cooling/heating/fan only
operation
Start
1
ON/OFF button (
Press this button to start the air conditioner.
2
MODE button
Select Cool
3
Set temperature button (
Set the desired temperature.
When the air conditioner is in FAN ONLY operation,
the temperature display is not indicated.
4
FAN button
Select one of
MED , MED
HIGH
• The OPERATION lamp (green) on the
display panel of the indoor unit illuminates. And
operation starts after approximately 3 minutes.
(If FAN ONLY mode is selected, the unit will start
immediately.)
• The : Fan only mode does not control
temperature.
• Fan speed
HIGH
Therefore, perform only steps
select this mode.
Stop
ON/OFF button (
Press this button again to stop the air conditioner.
15-EN
3
4
TEMP
1
2
)
, Heat , or Fan only
)
TEMP
+
LOW , LOW
+
,
.
is the same as
.
1 2
, and
)
Dry operation
Start
1
ON/OFF button (
Press this button to start the air conditioner.
2
MODE button
Select DRY
3
Set temperature button ( )
Set the desired temperature.
• The fan speed display indicates
• The
.
display panel of the indoor unit lights, and
operation starts after approximately 3 minutes.
Stop
ON/OFF button (
Press this button again to stop the air conditioner.
,
4
to
– 15 –
TEMP
)
.
TEMP
OPERATION lamp (green) on the
)
Owner's Manual
3
1
2