Updating Device Drivers - Gateway 1450 User Manual

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet Service Provider, the update utility
works by direct-dialing the device driver update service.
Important
To update device drivers:
1
Insert the red Gateway CD into your CD or DVD drive. The System
Restoration Kit program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
3
In the
Open
of your CD or DVD drive).
4
Click
OK
5
If the Welcome to the System Restoration Kit window opens, close it by
clicking
6
Click the
7
Click
Check Now
If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the red Gateway CD or the Gateway Technical
Support Web site (www.gateway.com/support).
If your system came equipped with an internal embedded
wireless device, see "Safety, Regulatory, and Legal
Information" on page 289 for general wireless regulatory
and safety guidelines.To find out if your system has an
internal wireless device, check the label (see "Identifying
your model" on page 10).
, then click . The Run dialog box opens.
Run
text box, type d:\runmenu.exe (where d is the drive letter
. The System Restoration Kit program starts.
.
OK
tab.
Update
. The Connect window opens.
www.gateway.com
Updating device drivers
245