The Upnp Screen - ZyXEL Communications P-2601HN(L)-F1 Series User Manual

Chapter 7 Home Networking
If you click Add new static lease in the Static DHCP screen, the following
screen displays.
Figure 36 Static DHCP: Add
The following table describes the labels in this screen.
Table 22 Static DHCP: Add
LABEL
MAC Address
IP Address
Apply
Back

7.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between devices. A
UPnP device can dynamically join a network, obtain an IP address, convey its
capabilities and learn about other devices on the network. In turn, a device can
leave a network smoothly and automatically when it is no longer in use.
See page 119
Use the following screen to configure the UPnP settings on your ZyXEL Device.
Click Network Setting > Home Networking > Static DHCP > UPnP to display
the screen shown next.
Figure 37 Network Setting > Home Networking > UPnP
116
DESCRIPTION
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
Click Apply to save your changes.
Click Back to exit this screen without saving.
for more information on UPnP.
P-2601HN(L)-F1 Series User's Guide