Mackie MDR24/96 Operation Manual page 65

1. From the Apple menu choose Control Panels and select TCP/IP.
2. From the File menu choose Configurations... Select the Default
Configuration and click the Duplicate... button.
3. Name the duplicate configuration MDR24/96 and click OK. This allows
you to have a network setting for normal use and one for the MDR
specifically. This way you won't have to remember your settings, you
can just choose the correct one for the task at hand.
4. Click the Make Active button with the MDR24/96 configuration
highlighted.
5. From the TCP/IP setup for the MDR24/96, make the following settings:
for the Connect Via box, choose Ethernet (it may say Ethernet Built In)
and for the Configure box, choose Manually. If you see an IP address
and subnet listed, leave them as is and change the settings on the
MDR24/96. If the fields are blank, we must assign an IP address and
subnet to the Mac.
7. Set the IP address to be identical to that of the MDR24/96 except for
the last field. For example, the default IP address on the MDR24/96 is
10.10.28.20. Set the IP address on the computer to 10.10.28.10 where
the last 10 is an arbitrary number that is not 20.
8. Set the Subnet mask to match identically that of the MDR24/96. The
default setting on the MDR24/96 is 255.255.0.0, so you should set the
Subnet mask in the Mac to be the same.
9. Leave the Router address, Name server address, and Search domains
blank.
10. From the File menu, choose Quit. It should prompt you to save; do so
now.
12. Your Macintosh should now be configured properly to see the
MDR24/96. Run the FTP server on the MDR24/96 and open the FTP
Client on your computer to transfer files.