About The Message Display In Remote Printer Mode - Oki OKIPAGE 12i User Manual

3. NETWORK SET UP FOR EACH OPERATION SYSTEM
ministrator privilege is given), set the print queue, the print server and
the printer for the Bindery Context with the PCONSOLE or the NetWare
Administrator.
For how to use the PCONSOLE and NetWare Administrator, please refer
to the subsection 3.2.4.1, "Setting up the remote printer using the NetWare
Administrator Utility," and the subsection 3.2.4.2, "Setting up the remote
printer using PCONSOLE."
For the details of the NetWare4.1x Bindery Service, please refer to the
Reference Manual of NOVELL NetWare4.1x.

3.2.6.3 About the message display in Remote Printer Mode

This network card temporarily stops receiving next queue(s) while receiv-
ing a job in the NetWare Remote Printer Mode, according to the Specifi-
cation. At this, NetWare server side handles this as temporary discon-
nection and a message to that effect is sent to the Client side. Once the
network card completes receiving of the current job, however, the con-
nection with the next queue is made, and receive process starts normally.
It is possible to change the display interval of the message from NetWare
server and user(s) for whom the message is displayed. You may change
the settings as you see fit.
1. Setting from Client in PCONSOLE using Novell Client32 client serv-
ice
1 Log in to NetWare file server from admin account. Here uncheck
the Bindery connection check box in the Client32 login window
and log in.
2 Start PCONSOLE from the NetWare file server volume at MS-
DOS prompt.
3 From "Items that you can use" window, select "Print Server" and
press Return key.
4 From "Print Server" window, select the target print server for which
you are changing the notification settings and press Return key.
5 From "Print server information" window, select "Printers" and press
Return key.
6 From "Service printers" window, select the printer name for which
you are changing the notification settings and press Return key.
23