Oki C5100n Installation Instructions

C5100/C5300 Duplex Option

Installation Instructions

Install the Duplexer

1. Unpack the duplexer and remove
the shipping materials.
2. Turn off the printer.
3. Insert the duplexer through the
hinged door in the back of the
printer.
4. Turn on the printer.
5. Print out the Menu Map.
B E
ACK NTER
M
ENU
+
a. Press one or more times until
INFORMATION MENU
on the display.
b. Press twice.
ENTER
The MenuMap prints.
6. Check to be sure that "DUPLEX
installed" shows in the information
at the top of the first page. If it
doesn't, turn off the printer and
push firmly on the duplexer to be
sure it is firmly seated in the
printer, then turn on the printer and
print the MenuMap again.
© 2003 Oki Data Americas, Inc.
Oki 42158401 Duplex Unit
7. If you will always be using duplex
printing, go into the printer menu
and change the default setting for
DUPLEX to ON:
a. Press
MENU
b. Press
c. Press
on the display.
d. Press
e. Press
from
f. Press
setting, then press
save the setting and exit the
menu.
Activate the
Duplexer in the

Printer Driver

Windows
O L
N INE
PCL Driver, C5300
C
ANCEL
1. Click
Printers and Faxes
[
The Printers (Printers and Faxes)
dialog box opens.
appears
2. Right click the PCL printer icon,
then click
3. Click the
4. Click
5. Click
(Printers and Faxes) dialog box.
Postscript Emulation Driver,
C5300
1. Click
Printers and Faxes
[
The Printers (Printers and Faxes)
dialog box opens.
+
until you see
PRINT
on the display.
.
ENTER
+
until you see
DUPLEX
.
ENTER
+
to change the setting
to .
OFF ON
ENTER to engage the
ON-LINE
®
Start → Settings → Printers
for XP].
Properties
Device Option(s)
tab.
Duplex Option Unit
.
OK
, then close the Printers
Start → Settings → Printers
for XP].
2. Right click the Postscript
emulation printer icon, then click
Properties
.
3. Next:
– Windows XP, 2000 and NT 4.0:
Device Settings
click the
– Windows Me and 98: click the
Device Options
Installable Options
4. Under
Duplex
and select
OK
5. Click , then close the Printers
(Printers and Faxes) dialog box.
Hiper-C Driver, C5100
Start → Settings → Printers
1. Click
Printers and Faxes
[
to
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the printer icon, then
Properties
click
3. Next:
– Windows XP, 2000 and NT 4.0:
Device Option(s)
click the
– Windows Me and 98: click the
Printer Properties
Device Option
the
Duplex Option Unit
4. Select
OK
5. Click , then close the Printers
(Printers and Faxes) dialog box.
®
Macintosh
OS 8.x and 9.x, C5300
Chooser
1. Activate
menu.
LaserWriter 8
2. Select
Printer → Setup
3. Click
Configure
4. Click
Duplex Unit
5. Change the
Installed
.
OK
6. Click twice.
Chooser
7. Close
(continued on back)
tab.
tab.
, click
Installed
.
for XP].
.
tab.
tab, then click
tab.
.
from the Apple
.
.
.
setting to
.
58359001