Vfo Auto Store; Vfo Delete Bank "J - AOR AR8600 Operating Manual

times to move to the FREE parameter.
(the default is off). Use the main dial to increment value by 1s or use the
to accept the changes and return to the display prior to accessing the VFO
environment menu. Alternatively you may move to the next option (VFO AUTO STORE) by pressing
the key.
While in VFO search, the LCD legend "FRE" is displayed to indicate that VFO free search is in operation
and the search process will only pause on active frequencies for the specified time.

4-4-6 VFO AUTO STORE

The VFO auto store causes the first 50 active frequencies located during VFO search to be
automatically written into memory bank "J" (channels J00 to J49). If bank "J" is full, VFO auto store will
not function.
Note: Memory banks are dynamically configurable so that bank "J" has 50 channels at
default but may be configured to provide 10, 20, 30, 40, 50, 60, 70, 80, or 90 channels.
Refer to section 5-7 of this manual regarding dynamic memory bank resizing.
VFO auto store is configured via the VFO environment menu, use the key sequence
to access the VFO environment menu.
AUTO STORE parameter.
(default is off).
to accept the changes and return to the display prior to accessing the VFO
environment menu. Alternatively you may move to the next option (DELETE J) by pressing the
(which is useful before exiting the environment menu).
While in VFO search, the LCD legend "AS" is displayed to indicate that VFO auto store is in operation.
Frequencies closer than ± 10 kHz to a frequency already stored in bank "J" will be ignored, this prevents
the same frequency being stored over and over again.
4-4-7 DELETE bank "J"
To simplify the results of VFO auto store, it is possible to delete the contents of memory bank "J" using
this menu... this allows you to quickly 'dump' the unwanted contents of the auto store memory bank "J"
before starting a new VFO search with the auto store feature enabled.
DELETE BANK "J" may be executed via the VFO environment menu, this is best carried out
immediately after the auto store facility has been activated. Alternatively you can 'dump' the contents of
the auto store bank "J" at any time. Use the key sequence
access the VFO environment menu.
parameter.
to access the VFO environment menu.
to toggle between OFF and 5 seconds
or use the
the key six times to move to the "DELETE J"
keys to increment by 5s.
the key five times to move to the
keys to toggle VFO auto store on/off
the key four
key
to