General - Insignia NS-39D40SNA14 User Manual

Insignia 39" LED TV

General

Problem Solution
No power.
• Make sure that the power cord
• Unplug the power cord, wait 60
• Other devices (for example, a
"No signal"
• Press INPUT and make sure that
error message is
displayed.
• If you are using a cable or
• Make sure that you have the
After Auto
• Reception can vary by channel
Channel Search,
there are no
channels.
• Make sure that the antenna or
• Try replacing the cable between
is correctly connected to your
TV and a power outlet.
seconds, then plug the cord
back in and turn on your TV.
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
you have selected the correct
input for the device or service
you are trying to use.
satellite box, use the remote
that came with that box to
change channels.
correct input selected to view
channels from the cable or
satellite box.
depending on the broadcast
power level of a given station.
Contact your cable or satellite
TV provider.
cable/satellite TV is connected
securely to your TV.
the antenna/cable or
cable/satellite box and your TV.
www.insigniaproducts.com
Problem Solution
One or more
• Make sure that the channels are
channels do not
not blocked. See
display.
parental control
page 51.
• Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See
page 46.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
• Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
"Checking the digital signal
strength" on page 48.
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. See
changing the
page 49.
Some settings
• If a setting is grayed, the setting
cannot be
is not available in the current
accessed.
video input mode.
TV cabinet
• When the TV is in use, the
creaks.
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
Control buttons
• Make sure that the Button Lock
do not work.
option is set to Off. See
"Locking control
page 50.
• Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
• Make sure that the sleep timer
turning off.
is not turned on. See
the sleep
A retail banner
• You selected "Retail Mode"
is displayed.
when you ran the TV setup
wizard. Reset your TV to the
factory defaults, then select
Home Use Mode on the What is
your viewing environment scree.
See
defaults" on page 65.
"Setting
levels" on
"Hiding channels" on
"Setting or
password" on
buttons" on
"Setting
timer" on page 57.
"Restoring settings to the
69